Table 3.19 Display Contents Of Menu Selection; Table 3.20 Display Contents Of Operation Help Display - Fujitsu PRIMEQUEST 2000 Series Tool Reference

UEFI Menu Operations
3.4 [Device Manager] Menu

TABLE 3.19 Display Contents of Menu Selection

Item
PCI ROM Priority
ASPM Support
Number of bus# Padded
to slot
Above 4G decoding
OpROM MMIO
Assignment
OpROM Scan
Configuration
I/O Space Assignment
Configuration
Commit Changes and Exit
Discard Changed and Exit
(3) Operation Help Display
The help for operations mentioned on this page is shown in the
Help Display"

TABLE 3.20 Display Contents of Operation Help Display

Item
↑↓= Move Highlight
<Enter>=Select Entry
Esc=Exit
In case of Option ROM of EFI and Legacy, specifies the Option ROM
to be start up.
 Legacy ROM: Selects when Legacy operating system is started.
 EFI Compatible ROM: Selects when UEFI Aware operating system
is selected.
Default setting is, EFI Compatible ROM.
Uses Active State Power
management of PCI Express Link. However, even though ASPM is
enabled, if PCI express adopter and on-board controller dose not
supports ASPM, link will not be enabled.
 Disabled
 Auto
 Limit to L0s
Default setting is, Disabled.
Changes the number of Bus allocated in PCI Express Slot.
 1
 2
 3
Default setting is 1.
Sets enable/disable of 4G or more Memory Mapped I/O.
 Disabled
 Enabled
Default setting is, Disabled.
Sets whether to allocate OpROM in MMIO.
 Disabled
 Enabled
Default setting is, Enabled.
Opens [OpROM Scan Configuration] Menu.
Opens [I/O Space Assignment Configuration] Menu.
Exit from main menu after the changed contents of configuration are
saved.
Exit from main menu after the changed contents of configuration are
cancelled.
Moves cursor up and down.
Selects item.
Returns to '3.1 Front page of Boot
of this menu'.
571
Display Contents
Management (ASPM)
"TABLE 3.20 Display Contents of Operation
Description
Manager' without saving changes
as power
CA92344-0539-04