Delete Raid Logical_Drive - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.53 delete raid logical_drive

Deletes a logical drive to the specified RAID controller.

Privilege: Administrator, Operator, Partition Operator (Only managed partition)
(1) Input format
delete raid logical_drive [SB | DU | IOU | PCI_BOX] <UNIT#>-<PCISLOT#>
target=<TargetID> {force}
(2) Option
target: This option specifies targetID of the logical drive which you want to delete. (ex. target=0).
force: The command is executed without interactive operation with the user.
(3) Usage example

Example:When you delete a logical drive 0 assigned to a RAID controller on SB#0.
# delete raid logical_drive SB 0-0 target=0
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The command is executed successfully.
The operation is canceled
Too much arguments argc=%d.
Too few arguments argc=%d.
The specified parameter is invalid. %s
The specified controller is not found.
Internal error [%d:%d].
Unable to execute the command because the system is under maintenance.
Unable to execute the command because the Partition#%d is under maintenance.
Unable to process raid operation because you have not authority to access to the system assigned to the raid
controller.
Unable to process raid operation because you have not authority to access to the Partition#%d assigned to the
raid controller.
412
CA92344-0539-04