Table 1.170 Display Of [Mmb] Window / Setting Items; Table 1.171 [Mmb#X] Window Button - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.7 [System] Menu for PRIMEQUEST 2800B2/2800B

TABLE 1.170 Display of [MMB] Window / setting items

Items
Board Information
Status
Part Number
Serial Number
MAC User port
address
Maintenanc
e
Port
Firmware Version
Location LED
Reset MMB
Voltage
Threshold Warning
(Low/Hig
h)
Critical
(Low/Hig
h)
Buttons
Apply Click the [Apply] button to set the specified control information.
Cancel Click the [Cancel] button to restore the original information and not set the specified information.
Displays the status of the MMB.

OK

Not-present

Warning

Degraded

Failed
Displays part number of the MMB.
Displays the serial number of the MMB.
Displays MAC address of the MMB management port.
00:00:00:00:00:00
Displays MAC address of the MMB port.
00:00:00:00:00:00
Firmware Version
Displays the status of the Location LED.
The following are the various display status.

On: During power on.

Off: During power off
On/ Off of the Location LED can be controlled by clicking [On], [Off] buttons.
Resets the MMB if this check box is checked.
Displays the current power voltage.
Lower and upper limits of the warning-level voltage.
Displays " – ", when the threshold is not set.
Displays the power voltage in the last two decimal places.
Lower and upper limits of the critical-level voltage.
Displays " – ", when the threshold is not set.
Displays the power voltage in the last two decimal places.

TABLE 1.171 [MMB#x] Window button

335
Description
Description
CA92344-0539-04