Web-Ui Menus In Maintenance Mode; Table 1.7 Types Of Maintenance Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.1 Web-UI Menus

1.1.6 Web-UI menus in maintenance mode

Some parameters have operational restrictions when maintenance mode is set. These restrictions apply to
the user who is set to maintenance mode and other users.
The following table lists the Web-UI window restrictions that apply to maintenance personnel and non-
maintenance personnel in maintenance mode.
The five types of maintenance mode are as follows.
Reference: The state to do the maintenance work from the screen of Maintenance -> Maintenance Wizard
with Maintenance Wizard is called a maintenance mode.
Hot System Maintenance
(Target unit not included in a partition)
Active (system) for work
Hot Partition Maintenance
(Target unit in a activated partition)
Active (partition) for work
Warm System Maintenance
(Target unit in a powered off partition)
Partition stopped for work
Cold System Maintenance
(All partitions powered off, breaker on)
Stopped (standby) for work
Cold System Maintenance
(All partitions powered off, breaker off)
Stopped (AC off) for work
The following sections outline the Web-UI menus that are available in maintenance mode for each type of
user privilege.
1.1.7 Web-UI menus in maintenance mode (Administrator)
-
1.1.8 Web-UI menus in maintenance mode (Operator)
-
- 1.1.9 Web-UI menus in maintenance mode (Partition Operator)
- 1.1.10 Web-UI menus in maintenance mode (User)
- 1.1.11 Web-UI menus in maintenance mode (CE)
1.1.12 Web-UI menus in maintenance mode (maintenance personnel)
-

TABLE 1.7 Types of maintenance mode

Maintenance mode
For maintenance work on the target unit not included in a
partition. The work can be performed without stopping
application software.
For maintenance work on a partition that is still operating
while under maintenance. This work can be performed without
stopping application software.
For maintenance work on the partition under maintenance or
the partition containing the target maintenance unit.
The partition must be stopped during maintenance.
The partitions not under maintenance need not be stopped.
For maintenance work that requires the system to be stopped.
All applications are forcibly stopped during maintenance
operation.
For maintenance work that requires the system to be stopped
and the AC power to be turned off (MMB power off). All
applications are forcibly stopped during maintenance
operation.
54
Description
CA92344-0539-04