Cancel Raid Patrol - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.72 cancel raid patrol

Cancels patrol read to the specified adapter.

Privilege: Administrator, Operator, Partition Operator (Only managed partition)
(1) Input format
cancel raid patrol [SB | DU | IOU | PCI_BOX] <UNIT#>-<PCISLOT#> {force}
(2) Option
force: The command is executed without interactive operation with the user.
(3) Usage example

Example:When you cancel patrol read to the adapter attached to SB#0.
# cancel raid patrol SB 0-0
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The command is executed successfully.
The operation is canceled
Too much arguments argc=%d.
Too few arguments argc=%d.
The specified parameter is invalid. %s
The specified controller is not found.
Internal error [%d:%d].
The operation is failed. %s
Unable to execute the command because the %s is under maintenance.
Unable to process raid operation because you have not authority to access to the system assigned to the raid
controller.
Unable to process raid operation because you have not authority to access to the Partition#%d assigned to the
raid controller.
431
CA92344-0539-04