Fujitsu PRIMEQUEST 2000 Series Tool Reference page 151

MMB Web-UI (Web User Interface) Operations
1.3 [Partition] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E
Items
Power Control
Force Power Off Delay
Boot Selector
Selects power control specified for the partition.
However, for the partition which is already in power-on state, [Power On] is not
displayed. On the contrary, for the partition which is already in powered off,
[Power Off], [Reset], [NMI], [Power Cycle], [Force Power Off] and [sadump] are
not displayed.

Power On: Partition is the powered on.

Power Off: Partition is powered off.
From the view point of Operating system, it is same as that the power
button of the device is on. Therefore, when the operating system
supports the ACPI, power can be turned off after the operating system is
shutdown. For details, see Power Specifications (ACPI) of the operating
system. When the operating system does not support the ACPI, the
power can be turned off without shutting down the operating system.

Power Cycle: Powered on again after the partition is forcibly powered on.

Reset: Resets the partition.

NMI: Produces the NMI interruption for the partition.

Force Power Off: Turns off the power forcefully.

sadump: Specifies the SADUMP for the partition.

(Not specified): There is no instruction for this partition.
Specifies whether to enforce power off, when power off is done without proper
operation of the shutdown instruction for the operating system by [Power Off]
on the partition. In case enforced power off has been specified, the specified
time (1~9 minutes) can be set. The partition is forcibly powered off when the
specified time has lapsed.
The default setting of check box is Off.
Specifies the boot device for which the Boot Manager setting of BIOS is
Override temporarily. Select the device to be boot from pull-down menu.

No Override: Boots by the EFI Boot Manager settings.

Force boot into EFI Boot Manager: Waiting for input by the EFI Boot
Manager. Boot by selecting the boot device from the EFI Boot Manager

Force Legacy PXE/iSCSI: Overrides the EFI Boot Manager settings,
forcibly tries the PXE. (BIOS Boot Type: Legacy)

Force boot from Legacy DVD: Overrides the EFI Boot Manager settings,
and forcibly tries the booting from the System DVD.(BIOS Boot Type:
Legacy)

Force UEFI PXE/iSCSI:
forcibly tries the PXE. (BIOS Boot Type: UEFI)

Force boot from UEFI DVD: Overrides the EFI Boot Manager settings,
and forcibly tries the booting from the System DVD.(BIOS Boot Type:
UEFI)
Default setting is 'No Override'.
This setting is applied only for the first partition boot setting the value. After the
partition boots, this setting automatically returns to 'No Override'. Therefore, it
is necessary to set the boot for each partition. In case of constant setting, it is
set in the Boot Manager of the UEFI.
150
Description
Overrides the EFI Boot Manager settings,
CA92344-0539-04