Show Partition Dynamic_Reconfiguration - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB CLI (Command Line Interface) Operations
2.3 Commands for Display
free
#
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute show partition configuration command.
2.3.6 show partition dynamic_reconfiguration
Displays the status of Dynamic Reconfiguration of the specified partition..
Privilege: Aｌｌ
(1)
Input format
show partition dynamic_reconfiguration <partition#>
(2)
Option
None
(3)
Usage example
Example: When the status of Dynamic Reconfiguration of Partition#3 is displayed
# show partition dynamic_reconfiguration 3
current: disabled
setting: enabled
#
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute show partition dynamic_reconfiguration command.
DR can't be enabled, because of no DR license
IOU#3
439
CA92344-0539-04
Advertisement
Table of Contents
