Table 3.23 Display Contents Of Menu Selection; Table 3.24 Display Contents Of Display Of Operation Help - Fujitsu PRIMEQUEST 2000 Series Tool Reference

UEFI Menu Operations
3.4 [Device Manager] Menu

TABLE 3.23 Display Contents of Menu Selection

Items
(I/O Device information)
Slot#
Device
Status
Setting (*1)
Commit Changes and Exit
Discard Changes and Exit
*1: As settings of Physical Partition remain same in Extended Partitioning, settings are only displayed but
cannot be changed.
(3) Display of Operation help
Description of operation key shown in

TABLE 3.24 Display contents of Display of Operation help

Item
  =Move Highlight
<Enter>=Select Entry
Esc=Exit
Displays "OnBoard" in case of the onboard device,
Displays "SB#" in case of the device with built-in SB.
Moreover, displays the PCI Slot number(decimal number) in case of Slot, and
displays the SB number in case of SB.
Displays a type of device.
Displays information about current I/O space assignment.
Assigned: I/O space is assigned.
N/a: I/O space is not assigned.
Displays the setting value. Following are the setting items.
Force: I/O space is assigned.
I/O space is assigned to the device for which [Force] is set, in preference to the
device for which [Auto] is set.
However, an error message is displayed if no. of slots, which can be assigned,
exceeds and is set to [Force].
Auto: I/O space is assigned to the extent that there is no shortage of I/O space.
Disabled: I/O space is not assigned.
Default setting is Auto.
After saving the contents the setting of which are changed, exit from this menu.
After cancelling the contents the setting of which are changed, exit from this
menu.
"" is displayed.
Description
Moves cursor up and down.
Selects item
Returns to "3.1 Front page of Boot
changed settings of this menu.
582
Display contents
Manager" without saving the
CA92344-0539-04