Table 1.95 Buttons In The [Date/Time] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.5 [Network Configuration] Menu
Items
NTP 2
Sets the IPv4 or IPv6 IP address of the NTP server.
(This item is valid only if [NTP] is [Enable]. If it is set to [Disable], the item is grayed
out.)
NTP 3
Sets the IPv4 or IPv6 IP address of the NTP server.
(This item is valid only if [NTP] is [Enable]. If it is set to [Disable], the item is grayed
out.)
Current Sync Status
Displays the synchronous status with the current NTP server.



TABLE 1.95 Buttons in the [Date/Time] window

Buttons
Apply Sets the specified information.
Cancel Restores the original information and does not set the specified information, such as the date
and time zone.
(1) Menu Operation
[Network Configuration] - [Date/Time]
(2) Window Operations
1. Specify information such as the date and time zone. Then, click the [Apply] button.
This sets the information such as the date and time zone.
[Message]
The following table lists the messages displayed in this window.
Message Number
I_00013 Setting completed.
E_00020 The IP address overlaps.
E_00100 Failed to set Date/Time information
W_00414 Invalid Date Format
W_00434 Invalid Time Format
W_00433 The duplicate IP address was found.
W_00432 Invalid IP Address specified.
For details on the messages displayed on the window, see
(CA92344-0540).
When synchronized: Displays the latest synchronous time together with the IP
address as follows:
xxx.xxx.xxx.xxx yyyy-mm-dd -dd:mm:ss
When not synchronized: Displays "No Sync."
219
Description
Description
Message
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04