Show Partition Lan_Device_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.3 Commands for Display

2.3.8 show partition lan_device_mode

Displays the setting (enable/disable) of LAN Device/WOL in IOU unit of the specified partition.
When the specified partition is an Extended Partitioning, an error message is displayed, and the specified
partition cannot be operated.

Privilege: Aｌｌ
(1) Input format
show partition lan_devoce_mode <partition#>
(2) Option
None
(3) Usage example

Example: When LAN Device Mode of IOU (In example it is IOU#2 or IOU#3) from Partition#3 is
displayed
#show partition lan_device_mode 3
iou#2: LAN Device: enable WOL: enable
iou#3:LAN Device: disable WOL: disable
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute %s command.
Failed to execute show partition command.
441
CA92344-0539-04