Fujitsu PRIMEQUEST 2000 Series Tool Reference page 153

MMB Web-UI (Web User Interface) Operations
1.3 [Partition] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00075 Partition#aa cannot execute sadump
E_00077 Partition#aa cannot execute Power On.
E_00078 Partition#aa cannot execute Power Off.
E_00079 Partition#aa command failed
E_00080 Partition#%aa cannot execute Power Cycle.
E_00081 Partition#%aa cannot execute Reset.
E_00082 Partition#%aa cannot execute NMI.
E_00084 Partition#%aa cannot execute Force Power Off.
E_00091 Force Power Off Delay setting failed.
E_00101 Unable to power on the partition#%aa due to CPU mismatch between SBs.
I_00214 Unable to Power On the Partition#%aa because this Partition is under maintenance.
I_00222 Unable to %aa the Partition#%aa because this Partition is under maintenance.
E_00422 Unable to power on the partition#%aa due to CPU composition abnormal.
E_00154 Unable to power on due to mismatch between supply voltage and input voltage.
E_00482 Unable to power on the partition#%aa due to DIMM composition abnormal.
E_00491 Unable to power on the partition#%aa due to DIMM does not satisfy requirements of
Mode.
W_00504 The Power On failed, because of switching the Home SB.
Please execute it after a while again.
E_00517 Unable to power on the partition#%d due to abnormal SB composition.
E_00543 Unable to power on the partition#%d due to abnormal Extended Partitioning
composition.
W_00587 Unable to execute Power Control because the firmware is updating.
W_00588 Unable to execute command because the power control operating.
For details on the messages displayed on the window, see
(CA92344-0540).
Message
PRIMEQUEST 2000 Series Message Reference
152
CA92344-0539-04