Show Dynamic_Reconfiguration Status - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.3 Commands for Display

2.3.37 show dynamic_reconfiguration status

Displays the progress of Dynamic Reconfiguration

Privilege: Aｌｌ
(1) Input format
show dynamic_reconfiguration status
(2) Option
None
(3) Usage example

Example: When SB#3 is to be added to Partition#2
# show dynamic_reconfiguration status
Adding SB#3 to Partition#2, running : 35%
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
Adding SB#%d to Partition#%d, completed
Adding IOU#%d to Partition#%d, completed
Removing SB#%d from Partition#%d, completed.
Removing IOU#%d from Partition#%d completed.
not executed.
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to show dynamic_reconfiguration status command.
Adding SB#%d to Partition#%d,running xx%
Adding IOU#%d to Partition#%d,running xx%
Adding [SB#%d|IOU#%d] to Partition#%d, Failed.
Removing SB#%d from Partition#%d,running xx%
Removing IOU#%d from Partition#%d,running xx%
Removing [SB#%d|IOU#%d] from Partition#%d, Falied.
463
CA92344-0539-04