Set Memory_Sparing_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.6 PRIMEQUEST 2800B2/2800B model Commands

2.6.17 set memory_sparing_mode

This command can be set only in case of the PRIMEQUEST 2800B2 models.
Rank of Memory Sparing Mode of system is set.
When this command is used, it is necessary to set Memory Operation Mode to Spare Mode beforehand.
The default value is 1Rank.
1 : 1 Rank is set.
2 : 2 Rank is set.
auto : Automatic setting.
Because the setting is restrained when this command is executed for system that has already done power
supply On, the following messages are displayed.
"Unable to change the mode while the system is running.
Please try to change the mode after the system is shutdown."
When the setting is changed to system that has already done power supply Off by this command, there is no
necessity of off/on of the power supply, and the value set at once without displaying the above-mentioned
message is reflected. Moreover, when the value is set to the same value now, the above-mentioned
message is not displayed about power supply off/on because it is unnecessary.

Privilege: Administrator, Operator
(1) Input format
set memory_sparing_mode [1 | 2 | auto] {quiet}
(2) Option
quiet: The command is executed without interacting with the user.
(3) Usage example

Example: When you set Rank of Memory Sparing Mode to 1.
# set memory_sparing_mode 1
The setting will become effective the next time the system power off/on is performed
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified partition number is invalid.The setting will become effective the next time the partition power
off/on is performed.
The specified parameter is invalid.
Unable to register the specified Partition#%d as Mode enable because the CPU mismatch between SBs.
Unable to register the specified Partition#%s as Mode enable because of abnormal SB composition.
Unable to change the mode because Memory Operation Mode is not spare mode.
Failed to execute %s command.
Failed to execute set partition command.
Unable to change the mode while the system is running.
Please try to change the mode after the system is shutdown.
Unable to execute this command because you have not authority to operate this system.
System Configuration Failed.
511
CA92344-0539-04