Show Partition Dimm_Excl_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.3 Commands for Display

2.3.39 show partition dimm_excl_mode

Displays the settings (enable/disable) of DIMM exclusive allocation mode of the specified Extended
Partitioning.
When the specified partition is not an Extended Partitioning, an error message is displayed and the specified
partition cannot be operated.

Privilege: Aｌｌ
(1) Input format
show partition dimm_excl_mode <partition#>
(2) Option
None
(3) Usage example

Example: When DIMM exclusive binding mode of Partition#4 is displayed,
# show partition dimm_excl_mode 4
Partition#4: DIMM excl mode: enable
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
The specified partition number is invalid.
The specified command is not supported.(error=[%s])
Unable to execute this command on a standby MMB.
Failed to execute 'show partition dimm_excl_mode' command.
Partition#x is not defined.
465
CA92344-0539-04