Fujitsu PRIMEQUEST 2000 Series Tool Reference page 397

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

Example: When PCI Express slot of SB#2 is to be added to Partition#4 in PRIMEQUEST 2800E
# add extended_partition sb 4 PCISLOT 2
Are you sure to continue adding PCI Slot of SB#2 to Partition#4? [Y/N] Y
Adding PCI Slot of SB#2 to Partition#4 has been completed successfully.
#

Example: When adding 37 CPU cores to Partition#4 whose CPU socket binding mode is enable.
(CPU is 18 cores/socket)
# add extended_partition sb 4 CPU 37
The specified number of cores will be modified (37 to 36), because SKT Binding
Mode is enable.
Are you sure you want to add 36 CPU Cores to Partition#4? [Y/N]: Y
Adding 36 CPU Cores to Partition#4 has been completed successfully.
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
Are you sure you want to add %s to Partition#%d? [Y/N]:
Adding %s to Partition#%d has been completed successfully.
The specified partition number is invalid.
The specified SB number for PCI Slot is invalid.
The specified partition doesn't have [SB#%d | SB].
Parameter missing
The specified parameter is invalid.
The specified command is not supported.(error=[%s])
Unable to execute this command on a standby MMB.
Failed to execute 'add extended_partition sb' command.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Unable to set configuration because this Extended Partitioning is powered on.
Partition#x is not defined.
The specified [USB1 | VGA/USB2 | PCI Slot] is not free.
The specified [CPU cores | Memory size] is too large.
396
CA92344-0539-04