Snmp V3 Configuration] Window; Figure 1.98 [Snmp V3 Configuration] Window; Table 1.113 Setting And Display Items In The [Snmp V3 Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.5 [Network Configuration] Menu

1.5.6.3 [SNMP v3 Configuration] window

You can set a unique Engine ID and users for SNMP v3 in the [SNMP v3 Configuration] window.
You can register a maximum of 16 users for SNMP v3. The window displays the user names of registered
users.
Remarks
If you change the Engine ID or IP address, you need to reconfigure all the settings for the users set for
SNMP v3 access.
The changes for the specified users take effect only after the SNMP Service is stopped and restarted. For
this reason, clicking the [Apply] button temporarily stops SNMP Service and then automatically restarts it.

TABLE 1.113 Setting and display items in the [SNMP v3 Configuration] window

Items
Engine ID
For an explanation of the setting and display items other than [Engine ID], see
display items in the [SNMP Trap]

FIGURE 1.98 [SNMP v3 Configuration] window

Sets the Engine ID.
You can use alphanumeric characters, spaces, and the following characters:
! " # $ % & ' ( ) = - ^ ~ ¥ @ ` [ ] { } : ; * + ? < > . , / _ |
However, the following restrictions apply:

The character string cannot begin with a space or #.

The character string cannot end with a space.
window.
248
Description
TABLE 1.111 Setting and
CA92344-0539-04