Appendix A List of Setting Items
A.1
A.1.4
Setting Items of [System Information] Window
The following table lists the initial value and the value that can be set for setting items of [System
Information] Window.
Setting
items
"PRIMEQUEST" +
System
Name
Product Serial Number
Asset Tag
None
A.1.5
Setting items of [System Setup] Window
The following table lists the initial value and the value that can be set of setting items of [System Setup]
Window.
Setting
Items
Power Feed
Single
Mode
Power
Restore
Restoration
Policy
Partition
0 Seconds
Power On
Delay
Altitude
Altitude < 1000 m
PSU
Non-Redundant (When
Redundancy
Power Feed Mode is single)
Mode
Reserved
10 Minutes
SB Force
Power Off
Wait
System
Disable
Power
Save Control
System
8640W
Power
Saving
Threshold
Setting Items of MMB Web-UI
TABLE A.4 Setting Items of [System Information] Window
Initial value
TABLE A.5 Setting items of [System Setup] Window
Initial Value
Value that can be set
Maximum 64 characters
can be entered [0-9], [a-z],
[A-Z],! " # $ % & ' ( ) = - ^ ~
¥ @ ´ [ ] { } : ; * + ? < > . / _
|
Maximum 32 characters
can be entered (Only
administrator privilege)
Value that can be set
Single
Dual
Always off
Always on
Restore
Schedule Sync
0 ~ 9999 Seconds
Altitude < 1000 m
1000 m <= Altitude <
1500 m
1500 m <= Altitude <
2000 m
2000 m <= Altitude
Redundant
Non-redundant
0~99Minutes
Enable
Disable
3200W ~ 8640W
700
Remarks
It is also used as System
Name of SNMP
Remarks
Setting error for Altitude
value can be 100 m.
When Power Feed Mode is
Dual, fix with Redundant
Can be set only when
PSU_P 200V is used
Grayed out when [System
Power Save Control] is
[Disable]
CA92344-0539-04