Figure 3.52 Display Example Of [Set Legacy Harddisk Drive Order] Menu; Table 3.69 Display Contents Of Menu Selection - Fujitsu PRIMEQUEST 2000 Series Tool Reference

UEFI Menu Operations
3.5 [Boot maintenance Manager] Menu
[Set Legacy Hard Disk Order] Menu

[Set Legacy Hard Disk Order] menu sets the HDD to be activated in the legacy operating system.
The window at the time of activation of [Set Legacy Hard Disk Order] menu is as shown below.
HDD information is displayed in this window. The HardDisk Drive is activated from #00. Moreover, when
"Disable" is displayed in #N of the HardDisk Drive, the boot function of HardDisk Drive #N is shown to be
Disabled.

FIGURE 3.52 Display Example of [Set Legacy HardDisk Drive Order] Menu

(1) Page Information Display
Displays as [Set Legacy HardDisk Drive Order]
(2) Menu Selection
Displays the items shown in the

TABLE 3.69 Display Contents of Menu Selection

Item
HardDisk Drive #N
(N: 0, 1 ...)
Commit Changes and Exit
Discard Changes and Exit
"TABLE 3.69 Display Contents of Menu
Following is displayed.
HDD information confirmed at the time of initialization after the
power-on
Disable: Displayed when Disable is selected.
Device for which the configuration is changed after initialization is
not displayed. Hence the system should be reset after the device
configuration changes. Further, the configuration change of the
device indicates the case where the following operations are
executed.
Swapping of USB devices
Activation of configuration display and update menu of Fibre
channel and SAS RAID
The change method is explained next in " Change of the Priority
Level (Set Legacy HardDisk Drive Order)".
Exit from this menu after saving the changes.
Exit from this menu after cancelling the changes.
634
Selection"
Explanation
CA92344-0539-04