Show Partition Skt_Binding_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.3 Commands for Display

2.3.40 show partition skt_binding_mode

Displays the settings (enable/ disable) of binding mode except CPU socket of the specified Extended
Partitioning.
When the specified partition is not an Extended Partitioning, an error message is displayed and the specified
partition cannot be operated.

Privilege: Aｌｌ
(1) Input format
show partition skt_binding_mode <partition#>
(2) Option
None
(3) Usage example

Example: When CPU socket binding mode of Partition#4 is displayed,
# show partition skt_binding_mode 4
Partition#4: CPU Socket binding mode: enable
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
The specified partition number is invalid.
The specified command is not supported.(error=[%s])
Unable to execute this command on a standby MMB.
Failed to execute 'show partition skt_binding_mode' command.
Partition#x is not defined.
466
CA92344-0539-04