Table A.36 Setting Items Of [Pci Subsystem Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Appendix A List of Setting Items
A.2
Setting item
CPU C3 Report
CPU C6 report
CPU C7 report
Package C
State limit
QPI Link
Frequency
Select
(*1)
Frequency
Floor Override
(*1)
Uncore
Frequency
Scaling (*1)
Perfmon and
DFX devices
(*1)
x2APIC Mode
(*1)
ACPI MSCT
*1: As settings of Physical Partition remain same in Extended Partitioning, settings are only displayed but
cannot be changed.
*2: This item is not displayed in Extended Partitioning.
*3: This item is displayed by fixation in Extended Partitioning.
A.2.3 Setting Items on [PCI Subsystem Configuration] Window
Following table lists the initial value and the values that can be set for Setting Items on [PCI Subsystem
Configuration] window.

TABLE A.36 Setting Items of [PCI Subsystem Configuration] Window

Setting item
PCI ROM
Priority
ASPM Support
Number of bus#
Padded to slot
Above 4G
decoding
OpROM MMIO
Setting Items on UEFI
Initial value
Disabled
Enabled
Enabled
No Limit
Auto
Disabled
Enabled
Disabled
Enabled
Enabled
Initial value
EFI Compatible ROM
Disabled
1
Disabled
Enabled
Values that can be set
 Disable
 Enable
 Disable
 Enable
 Disable
 Enable
 C0
 C2
 C6
 C7
 No Limit
 Auto
 9.6GT/s
 8.0GT/s
 7.2GT/s
 6.4GT/s
 Disable
 Enable
・Disable
・Enabled
 Disable
 Enable
・Disable
・Enabled
・Disable
・Enabled
Setting value
 Legacy ROM
 EFI Compatible ROM
 Disabled
 Auto
 Limit to L0s
 1
 2
 3
 Enabled
 Disabled
 Enabled
722
Remarks
Displayed when "Custom"
is selected on "Power
Technology".
Displayed when "Custom"
is selected on "Power
Technology".
Displayed when "Custom"
is selected on "Power
Technology".
Displayed when "Custom"
is selected on "Power
Technology".
9.6 GT/s : only for
PRIMEQUEST
2400E2/2800E2/2800B2.
Only for PRIMEQUEST
2400E/2800E/2800B
Only for PRIMEQUEST
2400E2/2800E2/2800B2
Only for PRIMEQUEST
2400E2/2800E2/2800B2
Remarks
CA92344-0539-04