Show Partition Memory_Sparing_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.3 Commands for Display

2.3.45 show partition memory_sparing_mode

This command can be display only in case of the PRIMEQUEST 2400E2/2800E2 models.
Displays the settings Rank of Memory Sparing Mode of specified partition.

Privilege: Aｌｌ
(1) Input format
show partition memory_sparing_mode <Partition#>
(2) Option
None
(3) Usage example

Example: When you display Rank of Memory Sparing Mode of Partitioning 3,
# show partition memory_sparing_mode 3
current: 1
setting: 1
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute %s command.
Failed to execute show partition command.
Partition#x is not defined.
472
CA92344-0539-04