Table 3.14 Reflection Of [Lan Remote Boot Configuration] Menu - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
UEFI Menu Operations
3.4 [Device Manager] Menu
3.4.2 [LAN Remote Boot Configuration] Menu
Network port implementing PXE/iSCSI boot can be selected in [LAN Remote Boot Configuration] Menu. In
the menu, PXE bootable network port is displayed. It is possible to boot PXE/iSCSI from the targeted device
by setting Enable after selecting network port which enables PXE/iSCSI boot. By default, the setting is such
that all network ports and PXE/iSCSI boot cannot be implemented (Disabled).
The settings changed in this menu are enabled after the system is set. For the contents set in this menu, see
"TABLE 3.14 Reflection of [LAN Remote Boot Configuration]
TABLE 3.14 Reflection of [LAN Remote Boot Configuration] Menu
Setting contents
UEFI (PXE/iSCSI) (*1)
Legacy PXE (*2)
Legacy iSCSI (*3)
Disabled
*1: Settings which Enable PXE/iSCSI boot of UEFI Aware Operating System.
*2: Settings which Enable PXE boot of Legacy Operating System.
*3: Settings which Enable iSCSI boot of Legacy Operating System.
Please set the setting of [PCI ROM Priority] of the PCI Subsytem Configuration menu to [EFI Compatible
ROM] to execute the PXE/iSCSI boot of UEFI.
Please set the setting of [PCI ROM Priority] of the PCI Subsytem Configuration menu to [Legacy ROM] to
execute the PXE/iSCSI boot of the legacy.
Following is the display of [LAN Remote Boot Configuration] Menu.
Reflected contents
Boot options of PXE boot are added in [Boot Manager].
Moreover, network ports are added to [iSCSI Configuration] Menu (See
"3.4.9 [iSCSI Configuration]
Boot options of PXE boot are added to [Set Legacy NET Drive Order
Menu (" Change in order of priority ((Set Legacy NET Drive Order)" of
"3.5.2 [Boot Options]
menu") of [Boot Maintenance Manager] Menu
This item is not displayed for the network port of the PCI LAN card.
"Press <Ctrl+D> to run setup" message is displayed at the time of boot.
When Ctrl+D is pressed in accordance with that message, setting menu
of Legacy iSCSI is displayed.
This item is not displayed for the network port of the PCI LAN card.
Remote boot is disabled.
Items added when [UEFI (PXE/iSCSI)], [Legacy PXE] or [Legacy iSCSI]
is selected, are deleted.
560
Menu"
menu") of [Device Manager] menu.
CA92344-0539-04
Advertisement
Table of Contents
