Pci Configuration Submenu - Fujitsu PRIMERGY TX200 S2 User Manual

Chapter 8 Configuring Hardware and Utilities

8.2.7 PCI Configuration Submenu

Configures the PCI device.
Main Advanced
> PCI SLOTS Configuration:
>
PCI IRQ Configuration:
Help
F1
Exit
Esc
Item
PCI SLOTS Configuration
PCI Slot 1 Configuration
Option ROM SCAN
PCI Slot 2 Configuration
Option ROM SCAN
PCI Slot 3 Configuration
Option ROM SCAN
PCI Slot 4 Configuration
Option ROM SCAN
PCI Slot 5 Configuration
Option ROM SCAN
PCI IRQ Configuration
PCI IRQ Line 1–8
240
PhoenixBIOS Setup Utility
Security Server
PCI Configuration
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: Items on the PCI Configuration Submenu
Setting
Configures the PCI slots. Press the [Enter] key to display the [PCI SLOTS
Configuration] submenu window.
After purchasing a diskless type, when installing a RAID card such as PG-142E3 in
PCI Slot 1 to connect an internal hard disk unit, change the setting for [PCI slot1
Configuration Option ROM SCAN] to [Enabled].
• Enabled
• Disabled (at the time of
purchase)
Sets PCI IRQs for the PCI slots. Press the [Enter] key to display the [PCI IRQ
Configuration] submenu window.
Auto (Fixed parameter)
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Description
Sets whether or not to initialize the extended ROM in
each PCI slot.
This server has five slots.
Sets the PCI IRQ.