The Ilom Network Configuration Cannot Be Set (Cr 6835854) - Fujitsu SPARC ENTERPRISE T5440 User Manual

Copyright 2009 Sun Microsystems, Inc.
OpenBoot 4.30.2.build_06***PROTOTYPE BUILD***, 2048 MB memory
available, Serial #XXXXXXX.
Ethernet address XX:XX:XX:XX:XX:XX, Host ID: XXXXXXX.
:
:
host1 console login: Chassis | critical: Host has been reset
:
SPARC Enterprise T5220, No Keyboard
Copyright 2009 Sun Microsystems, Inc.
OpenBoot 4.30.2.build_06***PROTOTYPE BUILD***, 2048 MB memory
available, Serial #XXXXXXXXX.
Ethernet address XX:XX:XX:XX:XX:XX, Host ID: XXXXXXX.
:
:
host1 console login:
Workaround: None. The second reset has no impact on the system.
The ILOM Network Configuration Cannot Be Set
(CR 6835854)
In case that the NET-MGT port of ILOM has not been connected with the LAN cable
and the DHCP function is enabled, the ILOM network configuration cannot be set.
Output example when the settings cannot be applied:
-> set /SP/network/ pendingipdiscovery=static
Set 'pendingipdiscovery' to 'static'
-> set /SP/network/ pendingipaddress=192.9.200.33
Set 'pendingipaddress' to '192.9.200.33'
-> set /SP/network/ pendingipnetmask=255.255.255.0
Set 'pendingipnetmask' to '255.255.255.0'
-> set /SP/network/ commitpending=true
set: Unable to get network management property
->
-> show /SP/network/ -d properties
/SP/network
Properties:
commitpending = (Cannot show property)
dhcp_server_ip = none
ipaddress = (none)
All rights reserved.
All rights reserved.
Chapter 3 Known Issues 39