Show Dynamic_Reconfiguration Status - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
(5) Process
Clears the internal information like Private-LAN etc. from netstat-tuwn.

2.3.37 show dynamic_reconfiguration status

Displays the progress of Dynamic Reconfiguration

Privilege: Aｌｌ
(1) Input format
show dynamic_reconfiguration status
(2) Option
None
(3) Usage example

Example: When SB#3 is to be added to Partition#2
# show dynamic_reconfiguration status
Adding SB#3 to Partition#2, running : 35%
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
Adding SB#%d to Partition#%d, completed
Adding IOU#%d to Partition#%d, completed
Removing SB#%d from Partition#%d, completed.
Removing IOU#%d from Partition#%d completed.
not executed.
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to show dynamic_reconfiguration status command.
Adding SB#%d to Partition#%d,running xx%
Adding IOU#%d to Partition#%d,running xx%
Adding [SB#%d|IOU#%d] to Partition#%d, Failed.
Removing SB#%d from Partition#%d,running xx%
Removing IOU#%d from Partition#%d,running xx%
Removing [SB#%d|IOU#%d] from Partition#%d, Falied.