Set Partition Home; Set Partition Lan_Device_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations

2.2.25 set partition home

It sets the Home SB of the specified partition.
It specifies the number of SB to be set in Home. If the specified SB does not exist, the process is not
executed.

Privilege: Administrator
(1) Input format
set partition home <partition#> SB <SB#>
(2) Option
None
(3) Usage example
Example: When setting SB#2 as Home in Partition3
# set partition home 3 SB 2
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified partition number is invalid.
The specified SB number is invalid.
The specified SB#x is Not‐present.
Unable to change the home SB while the partition is running. Please try to change the home SB after the
partition is shutdown.
Unable to execute this command on a standby MMB.
The specified parameter is invalid.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Succeed to set partition home command.
Failed to execute set partition home command.
Failed to execute %s command.
The specified command is not supported.(error=[%s])

2.2.26 set partition lan_device_mode

LAN Device Mode is set by the IOU unit in the specified partition.
Default value set is wol_disable.
wol_enable: Onboard LAN enabled with AC On.
wol_disable: Onboard LAN enabled with Partition On.
device_disable: Onboard LAN device disabled always.
For the partition which is already powered ON, when the settings are performed by this command, following
message is displayed and settings cannot be performed.
"Unable to change the mode while the partition is running.
Please try to change the mode after the partition is shutdown."