Table of Contents
Advertisement
MC68HC908GP32
MC68HC08GP32
•
MOTOROLA
Freescale Semiconductor, Inc.
•
Low-power design; fully static with stop and wait modes
•
Standard low-power modes of operation:
– Wait mode
– Stop mode
•
Master reset pin and power-on reset (POR)
•
32 Kbytes of on-chip FLASH memory with in-circuit programming
capabilities of FLASH program memory
•
512 bytes of on-chip random-access memory (RAM)
•
Serial peripheral interface module (SPI)
•
Serial communications interface module (SCI)
•
Two 16-bit, 2-channel timer interface modules (TIM1 and TIM2)
with selectable input capture, output compare, and PWM
capability on each channel
•
8-channel, 8-bit successive approximation analog-to-digital
converter (ADC)
•
BREAK module (BRK) to allow single breakpoint setting during
in-circuit debugging
•
Internal pullups on IRQ and RST to reduce customer system cost
•
Clock generator module with on-chip 32-kHz crystal compatible
PLL (phase-lock loop)
•
Up to 33 general-purpose input/output (I/O) pins, including:
– 26 shared-function I/O pins
– Five or seven dedicated I/O pins, depending on package
choice
•
Selectable pullups on inputs only on ports A, C, and D. Selection
is on an individual port bit basis. During output mode, pullups are
disengaged.
•
High current 10-mA sink/10-mA source capability on all port pins
•
Higher current 15-mA sink/source capability on PTC0–PTC4
•
Timebase module with clock prescaler circuitry for eight user
selectable periodic real-time interrupts with optional active clock
source during stop mode for periodic wakeup from stop using an
external 32-kHz crystal
Rev. 6
—
General Description
For More Information On This Product,
Go to: www.freescale.com
General Description
Features
Technical Data
33
Advertisement
Chapters
Table of Contents
