Copying With Programmed Copy Settings (Mode Memory); To Recall A Stored Job - Oce CS191 Phase 3 User Manual

5
5.5 Copying with programmed copy settings (Mode
Memory)

To recall a stored job

Programmed copy settings can be recalled to be used again for copying.
1
Position the original to be copied. (For details, refer to page 4-9.)
2
Press the [Mode Memory] key.
The Recall Copy Program screen
appears.
3
Touch the button for the copy program registered with the desired
copy settings.
– If the copy settings in the selected copy program are not to be
checked, skip to step 8.
5-16
Additional copy operations
CS191 (Phase3)