Oce CS191 Phase 3 User Manual page 425

Application functions
4
Select the desired copy settings, and then press the [Start] key.
– To print a single copy to be checked, touch [Proof Copy] key.
Scanning begins.
5
Select [Fix], and then touch [OK].
– To change the copy settings, select [Retry], and then touch
[Change Setting].
– If the original is placed on the original glass, touch [Finish] in the
screen that appears, requesting confirmation that scanning of the
original is finished.
6
Position the next original batch, and then touch [Change Setting].
CS191 (Phase3)
9
9-27