Utility
–
Each time [+] or [–] is touched, the value is increased or decreased
by one increment.
–
If the lines are not shifted from the reference lines, skip to step 10.
8
Press the [Start] key.
The adjusted test pattern is printed.
When is the adjustment applied?
?
% The adjustment is applied when the [Start] key is pressed. To
cancel the adjustment, touch [Cancel] instead of pressing the
[Start] key.
9
Check the print result.
–
If there is no shift between the black and cyan lines, continue with
step 10.
–
If more adjustment is necessary, repeat steps 7 and 8.
10
Touch [OK].
–
To cancel changes to the settings, touch [Cancel].
CS191 (Phase3)
13
13-87