Utility
7
Touch [+] or [–] to adjust the setting between –5 and +5. An adjustment
is possible if the size of the white areas in missing print or the white
spots is 0.5 mm or less.
–
For missing print or white spots in the print image, touch [–] to
reduce the adjustment.
–
For uneven printing of the print image, touch [+] to increase the
adjustment.
–
Each time [+] or [–] is touched, the value is increased or decreased
by one increment.
–
To cancel the adjustment, touch [Cancel].
CS191 (Phase3)
13
13-71