Oce CS191 Phase 3 User Manual page 165

Basic copy operations
10
Load the next batch of the original, and then press the [Start] key.
– Repeat this step until all pages of the original have been scanned.
– To change the scanning settings, touch [Change Setting]. For
details on changing the scanning settings, refer to "To change scan
settings for each original" on page 4-37.
– The buttons that appear in the Change Setting screen differ
depending on the specified settings. Settings for the following can
be changed.
Simplex/Duplex, Bind, Zoom, Frame Erase, Center Erase, Original
Size
11
After all original pages have been scanned, touch [Finish].
CS191 (Phase3)
4
4-21