Oce CS191 Phase 3 User Manual page 370

8
Standard-sized paper:
Paper source
Bypass tray
Tray 1
Tray 2
Single/Double paper feed
cabinets
LCT
Double-sided copies
Loaded equipment
Finisher (FS-514)
Output Tray (OT-601)
Saddle Stitcher (SD-503)
Mailbin Kit (MT-501)
Finishing tray (standard)
*1
There are five Foolscap sizes: 220 e 330 mm w, 8-1/2 e 13 w, 8-1/4 e
13 w, 8-1/8 e 13-1/4 w and 8 e 13 w. Any one of these sizes can be
selected. For details, contact the technical representative.
*2
Can be used when optional punch kit is installed on finisher.
8-4
Paper size
A3 w to B6 w, A6 w, A3 Wide (12 e 18 w), 11 e 17 w to 5-1/2 e
*1
8-1/2 w/v, 8 e 13 w
A3 w to B6 w, A6 w, A3 Wide (12 e 18 w), 11 e 17 w to 5-1/2 e
*1
8-1/2 w/v, 8 e 13 w
A3 w to A5 w, 11 e 17 w to 8-1/2 e 11 w/v, 8 e 13 w
A4 v
A3 w to A5 w/v, A3 Wide (12 e 18 w), 11 e 17 w to 5-1/2 e 8-
*1
1/2 w, 8 e 13 w
Paper sizes that can be loaded
Finishing tray 1, 2 and optional Output Tray
A3 w to B6 w, A6 w, A3 Wide (12-1/4 e 18 w)
"Group"/"Sort" settings: A3 w to A5 v
Staple settings: A3 w to A5 v
Punch settings: A3 w, A4 v, B5 w
Fold & staple: A3 w, B4 w, A4 w, B5 w
A4 v, B5 v, A5 w
A3 w to B6 w, A6 w, A3 Wide (12 e 18 w), 11 e 17 w to 5-1/2 e
8-1/2 w/v
Copy paper/originals
*1
*2
CS191 (Phase3)