Oce CS191 Phase 3 User Manual page 90

3
No. Part name
1 Reverse Automatic Document
Feeder DF-608
2 Original Cover OC-501
3 Working Table WT-501
4 Fax Multi Line Mount Kit ML-501
5 Image Controller IC-406
6 Paper Feed Cabinet PC-103
7 Paper Feed Cabinet PC-203
8 Paper Feed Cabinet PC-403
9 Finisher FS-514
10 Output Tray OT-601
11 Punch Kit PK-510
12 Mailbin Kit MT-501
13 Saddle Stitcher SD-503
3-4
Before making copies
Description
Automatically feeds one original sheet at a time for
scanning, and automatically turns over double-sid-
ed originals for scanning
Referred to as the "ADF" throughout the manual.
Presses down on the loaded original to keep it in
place
Referred to as the "original cover" throughout the
manual.
Provides an area to temporarily place an original or
other materials
Installed to increase the telephone lines available
for faxing
Allows this machine to be used as both a color
printer and a color scanner configured into a com-
puter network
For details, refer to the manual provided with image
controller IC-406.
The top tray can be loaded with up to 500 sheets of
paper, and the bottom tray can be used as storage.
Referred to as the "single paper feed cabinet"
throughout the manual.
Both the top and bottom trays can each be loaded
with up to 500 sheets of paper.
Referred to as the "double paper feed cabinet"
throughout the manual.
Can be loaded with up to 2,500 sheets of paper
Referred to as the "LCT" throughout the manual.
Feeds out finished printed pages. The "Sort" setting
(separating by copy set), "Group" setting (separat-
ing by page), and Staple settings (corner stapling
and two-point stapling) are available.
Referred to as the "finisher" throughout the manual.
Copy output tray installed onto the finisher and
used for separating printed pages
Referred to as the "optional finishing tray" through-
out the manual.
Allows hole punching to be used if installed onto fin-
isher
Referred to as the "punch kit" throughout the man-
ual.
Installed onto the finisher to divide printed pages
and feed them into the appropriate tray assigned to
a specific individual or group (only with computer
printing)
Referred to as the "mailbin" throughout the manual.
Installed onto the finisher to allow copies to be
bound or folded at the center
Referred to as the "saddle stitcher" throughout the
manual.
CS191 (Phase3)