4
4.5
Copying with programmed copy settings (Mode Memory)
Programmed copy settings can be recalled to be used again for copying.
1
Position the original to be copied.
–
For details on positioning the original, refer to "Feeding the original" on page 3-8.
2
Press the [Mode Memory] key.
The Recall Copy Program screen appears.
3
Touch the button for the copy program registered with the copy settings to be recalled.
–
If the copy settings in the selected copy program are not to be checked, continue with step 8.
–
If the copy program to be recalled is not displayed, touch
program is displayed.
4-14
Additional copy operations
and
until the desired copy
CS193/CS173/CS163