Precautions For Positioning Originals On The Original Glass - Oce CS191 Phase 3 User Manual

8

Precautions for positioning originals on the original glass

Observe the following precautions when placing the original on the original
glass.
- The size of originals printed on paper in inch sizes (such as 11 e 17,
8-1/2 e 14, 8-1/2 e 11) cannot be automatically detected. The setting
must be specified by the technical representative. For details, contact the
technical representative.
- If an original of non-standard paper size is loaded, the "Auto Paper
Select" and "Auto Zoom" settings cannot be used since the original size
cannot be detected automatically. If an original of non-standard paper
size is loaded, select the size of the paper to be copied.
- If highly translucent or transparent originals, such as OHP or diazo
photosensitive paper, are loaded, the original size cannot be detected
automatically. Place a blank sheet of paper of the same size over the
original.
- Do not place objects exceeding 2 kg on the original glass, otherwise the
original glass may be damaged.
- If a book is placed on the original glass, do not press it down extremely
hard, otherwise the original glass may be damaged.
8-32
Copy paper/originals
CS191 (Phase3)