Basic copy operations
4
Basic copy operations
4.1
General copy operation
This section contains information on the general operation for making
copies. The following procedure describes how to copy a single-sided
original using basic copy operations.
Note
Some settings cannot be used together. For details on the settings that
cannot be combined, refer to "Operations that cannot be combined" on
page 4-6.
To make a copy
1
Press the [Copy] key to display the Basic screen in Copy mode.
2
Position the original to be copied.
–
For details on positioning the original, refer to "Feeding the original"
on page 4-9.
CS191 (Phase3)
4
4-3