Oce CS191 Phase 3 User Manual page 427

Application functions
9
Select [Yes], and then touch [OK].
– To change the copy settings, select [No], and then touch [Change
Setting].
10
Specify any other desired copy settings.
– Touch [Print], and then specify the printing method for the entire
scanned original.
? Is there more information about the settings?
% Refer to the appropriate section.
11
Using the keypad, type in the desired number of copies.
12
Touch [Execute] or press the [Start] key.
– If [Cancel] is touched, a message appears, requesting confirmation
to delete the data. To stop printing, select [Yes], and then touch
[OK].
CS191 (Phase3)
9
9-29