Oce CS191 Phase 3 User Manual page 431

Application functions
– When using the keypad to specify the settings in the Center Erase
screen, press the [C] (clear) key, and then type in the setting.
– To cancel the "Book Copy" function, touch [OFF].
? What do the Book Erase functions do?
% The shadow of the book binding and the shadow of the book edges
can be erased from the copies. The "Erase" and "Center Erase"
functions can be used together.
? How are settings specified for the "Erase" function?
% Refer to "Erasing specified areas of copies ("Erase" function)" on
page 9-73. In addition, if the "Erase" function in the Application
screen is specified, [Erase] under "Book Erase" will be selected.
? What happens when a value outside of the allowable range is
specified?
% The message "Input Error" appears. If "Input Error" appears or if the
erased width was incorrectly entered, press the [C] (clear) key in the
keypad, and then specify the correct value.
6
Touch [OK], and then touch [OK] in the next screen that appears.
CS191 (Phase3)
Center Erase screen
9
9-33