Specifying Administrator Settings; System Setting - Oce CS191 Phase 3 User Manual

Utility
13.4

Specifying administrator settings

This section describes the main parameters and operations that can be
performed after pressing the [Utility/Counter] key, then touching [3
Administrator Setting].

System setting

Power Save Setting
Parameter
Low Power Mode Set-
ting
Sleep Mode Setting
Power Save Key
Entering Power Save
Mode (Fax)
CS191 (Phase3)
Description
Specify the desired length of time (be-
tween 10 and 240 minutes) until the ma-
chine enters Low Power mode.
Specify the desired length of time (be-
tween 15 and 240 minutes) until the ma-
chine enters Sleep mode.
Select which low power mode is entered
when the [Power Save] key is pressed.
• Low Power:
The touch panel goes off and the ma-
chine enters a mode where it con-
serves energy.
• Sleep:
Although the machine conserves
more energy in Sleep mode than in
Low Power mode, the machine must
warm up when Sleep mode is can-
celed, therefore taking more prepara-
tion time than Low Power mode.
Specify settings for faxing. For details,
refer to the [Facsimile Operations] and
the [Network Facsimile Operations] of
the user manual.
13
Default Setting
15 minutes
30 minutes
Low Power
Normal
13-39