13
9
Type in the password (up to 64 characters), and then touch [OK].
A screen for retyping the password appears.
10
Retype the password specified in step 9, and then touch [OK].
The user password is set.
11
Touch [E-Mail Address].
The E-Mail Address screen appears.
12
Type in the e-mail address (up to 320 characters), and then touch [OK].
The e-mail address is set.
If the e-mail address exceeds 116 characters, [Details] appears in the
User Registration screen. Touch [Details] to display the E-Mail Address
Details screen and the entire e-mail address.
13
Touch [Account Name].
The Account Name screen appears.
14
Touch the button for the desired account, and then touch [OK].
The account is set.
–
Before an account name can be selected, accounts must have
been registered. For details on registering accounts, refer to
"Account track registration" on page 13-114.
15
Touch [Output Permission].
The Output Permission screen appears.
16
Beside "Print" and "Scan", touch the button for the desired settings.
–
To permit the user to output, touch [Allow].
–
To prohibit the user to output, touch [Restrict].
13-106
Utility
CS191 (Phase3)