Oce CS191 Phase 3 User Manual page 656

13
10
Beside "Synchronize User Authentication & Account Track", touch the
button for the desired setting.
– Synchronize:
If "ON (MFP)" is set and "Account Track" is set to "ON", this setting
allows this machine to be used simply by entering user
authentication information the first time that the machine is used if
the corresponding account was specified during user registration.
If "ON (External Server)" is set and "Account Track" is set to "ON",
this setting allows the machine to be used simply by entering user
authentication information after the machine has been used once
with the appropriate user authentication and account track
information entered.
– Do Not Synchronize:
This setting requires that all information be entered for user
authentication and account track each time that the machine is
used.
11
Beside "# of Counters Assigned for Users", specify the desired setting.
– Press the [C] (clear) key to erase the value, and then use the keypad
to specify the desired value (between 1 and 999).
– If user authentication and account track settings have been
applied, counters can be assigned to both accounts and users, and
counts for both can be totaled.
12
Touch [OK].
– If the setting for "User Authentication" or "Account Track" was
changed, the message "Are you sure you want to clear all data?"
appears.
13
Touch [Yes].
The authentication method is set.
Continue by specifying settings for user authentication and account
track.
13-96
Utility
CS191 (Phase3)