9
To copy using the "OHP Interleave" function
0 The Finishing setting cannot be changed.
0 The number of copies is set to "1" and cannot be changed.
1
Position the original to be copied.
–
For details on positioning the original, refer to "Feeding the original"
on page 4-9.
2
Load OHP into the bypass tray or the tray 1. Load the interleaf paper
into the desired paper tray.
–
Use interleaf paper with the same size as the OHP, and load them
in the v orientation.
3
Touch [OHP], and then touch [OK].
–
If the OHP are loaded into the tray 1, touch [Paper], select the tray
1, and then touch [Change Tray Settings].
The Paper screen appears.
9-4
Application functions
CS191 (Phase3)