Before making copies
3.7
Loading paper into the bypass tray
Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper tray, or if you wish to copy onto thick
paper, postcards, envelopes, OHP or labels.
To load paper (bypass tray)
1
Open the bypass tray.
–
When loading large-sized paper,
pull out the tray extension.
2
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3
Slide the lateral guides to fit the size
of paper being loaded.
4
Select the paper type.
CS191 (Phase3)
3
Tray
extension
Lateral guides
3-53