Oce CS191 Phase 3 User Manual page 520

Replacing toner cartridges and staples and emptying waste containers
10
Display while a job is being performed
!
Detail
When performed by user
If the hole-punch waste container has become full while a job is being
performed, the job being performed is paused. To continue the job
without canceling the Punch setting, empty the hole-punch waste
container. To cancel the Punch setting and continue the job, touch
[Cancel Punch].
When performed by technical representative
If the hole-punch waste container has become full while a job is being
performed, the job being performed is paused. To continue the job, touch
[Cancel Punch]. However, the continued job is printed without holes
being punched.
Display in Enlarge Display mode
10-24 CS191 (Phase3)