Punching Holes In Copies (Punch Settings) - Oce CS191 Phase 3 User Manual

Basic copy operations

Punching holes in copies (Punch settings)

!
Detail
In order for holes to be punched in the copies, all of the following
conditions must be met.
- The paper width must be between 182 mm and 297 mm.
- The paper length must be between 182 mm and 432 mm.
If a Punch setting is to be selected, select the orientation in which the
original is positioned. If an Original Direction setting is not selected, holes
may not be punched in the copies as desired.
For details on specifying the original orientation, refer to "Selecting the
original orientation (Original Direction settings)" on page 4-28.
Note
The Punch settings are available only if the optional finisher and punch kit
are installed.
Paper weight
2
50 g/m to 209 g/m
CS191 (Phase3)
Paper size
2
A3 w, A4 v, B5 w
4
4-93