4
4.5
Copying With Programmed Copy Settings (Mode
Memory)
To recall a stored job
Programmed copy settings can be recalled to be used again for copying.
1
Position the document to be copied. (For details, refer to page 3-8.)
2
Press the [Mode Memo-
ry] key.
The Recall Copy Pro-
gram screen appears.
3
Touch the button for the copy program registered with the desired
copy settings.
–
If the copy settings in the selected copy program are not to be
checked, skip to step 8.
4-14
Additional Copy Operations
Mode Memory
cm4520