Descriptions And Symbols For Originals And Paper; Width" And "Length; Paper Orientation - Oce CS191 Phase 3 User Manual

1
1.22

Descriptions and symbols for originals and paper

The use of words and symbols in this manual are explained below.

"Width" and "Length"

Whenever paper dimensions are
mentioned in this manual, the first value
always refers to the width of the paper
(shown as "Y" in the illustration) and the
second to the length (shown as "X").

Paper Orientation

Lengthwise (w)
If the width (Y) of the paper is shorter than
the length (X), the paper has a vertical or
portrait orientation, indicated by w.
Crosswise (v)
If the width (Y) of the paper is longer than
the length (X), the paper has a horizontal or
landscape orientation, indicated by v.
1-42
Introduction
CS191 (Phase3)