Oce CS191 Phase 3 User Manual page 266

5
7
Again touch the button for the program with the desired copy settings.
– If [OK] is touched with no copy program selected, the Basic screen
appears again without a copy program recalled.
8
Touch [OK].
The programmed copy settings are recalled and the Basic screen
appears again.
9
Press the [Start] key.
Copying begins with the recalled copy settings.
Note
To stop recalling the copy program, press the [Reset] key or the [Mode
Memory] key, or touch [Cancel].
The copy settings cannot be changed from the Mode Check screens.
5-18
Additional copy operations
CS191 (Phase3)