8
To specify a setting for special paper
If a setting for special paper, such as OHP and other special paper, is
selected for a paper tray, that tray is not selected automatically with the
"Auto Paper Select" setting or the ATS feature. However, a paper tray set to
"Single Side Only" is given priority when the "Auto Paper Select" setting is
specified or when the paper trays are switched automatically.
The following procedure describes how to specify the setting for oversized
paper loaded into the tray 1.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for the tray 1.
–
To set the paper size for the bypass tray, touch the button for the
bypass tray.
8-24
Copy paper/originals
CS191 (Phase3)